Diamond Blades for Cutting Granite.Most of our granite blades are made with high quality diamonds and metal. Diameters of these diamond blades start from 12 inch to 24 inch.Different arbor sizes on these granite blades make them very versatile.
Specified for cutting of engineering stone. It adopts diamond of good self-sharpening and high quality, unique formula and structure design, high precision welding.1、Good sharpness, cut smoothly witho
Tuck Point Blades are used for tuckpointing or repointing, which is the removal of mortar joints and the preparation of masonry surfaces including concrete, block, bricks, pavers and stone. Diamond tuck point grinding blades come brazed, polished, sintered, cooling holes, sandwich core design, key hole gullet, v-segment and wide u-gullet. Tuck Point Blades are commonly used by general masonry or tuck point contractors.
Vacuum Brazed Diamond Saw Blades are used for cutting various granite, marble, concrete, etc. with special design and world-advanced technology of diamond brazing, the edge of saw blade will be free cutting, the cutting speed will be faster and the efficiency of cutting will be improved greatly.
Product NameSpecificationArborProcessing projectAdvantageNoteZL-QH09 Brazed cutting blade D125*T2.5mm, Central hole: 22.23 or M14 flange.Cutting and grinding of stone, concrete, and terrazzo
1.To set up the diamond blade, the power must be disconnected. The arrow on the diamond blade and the rotating direction of the machine must be corresponding.2.Always wear protective goggles, protecti
1.To set up the diamond blade, the power must be disconnected. The arrow on the diamond blade and the rotating direction of the machine must be corresponding.2.Always wear protective goggles, protecti
Sintered diamond blades are made by cold pressed or hot pressed sintering technologies. Selected diamonds are mixed and sintered with specific metal alloys to achieve the best cutting performance possible on any hard materials such as marble, granite, ceramic, concrete, bricks, porcelain, etc.